What is the difference between the rotary tattoo machine Dragonhawk Mast Pen and induction

The Dragon Hawk brand of tattoo machines has been chosen by many tattoo artists in the world. Despite being a new brand, it produces equipment that is considered one of the leading in the market. Dragon Hawk manufactures and distributes both induction and rotary machines. The website inked.com.ua offers products from this manufacturer, as well as various complete kits for beginners - pigments, needles and cartridges.

Dragon Hawk supplies Coil and Dragonhawk Mast Pen Rotary Tattoo Machines, and some of their kits even include a combination of the two. The Mast Pen offers durability and reliability. Thanks to its rugged construction and powerful Japanese motor, it not only guarantees stable operation, but also withstands regular wear and tear.

What parts a rotary tattoo machine consists of

Rotary tattoo machines have a fundamental difference from their induction counterpart - they are equipped with a motor by means of which the work of the device is provided. Rotary tattoo machine consists of the following parts:

  • Rotary drive and steel holders for it.
  • Holders for the needle guide. Mainly steel holders are used, but there are also holders of copper, aluminum, silicone or plastic. The holders make it easier to grip and reduce the friction during long runs.
  • Needle and Rod. Made of stainless steel.
  • Clip Cord. Special electric actuator that connects the machine and the pedal.
  • Clip Cord Pedal. Manipulator that activates and deactivates the machine.
  • Power supply.

Induction machines

Induction type machines have a more complex device. They are based on magnetic coils which actuate the needle by attraction. The power of the machine depends on the number of these coils. Usually there are 1-16 pieces.

Working with the induction machine, the master has the ability to adjust the speed and frequency of vibration. It is especially important to create a suitable impact power. If it will be too low, the activity will be ineffective, and with high power there is a risk of causing wounds. The parameter is adjusted with a pressure screw.

Induction machine has more weight, so to work with such a device will require dexterity. On the other hand, the machine is much easier to paint a large image, as there is an opportunity to control the density of the fill with the help of induction.

Induction machines are divided into contouring and painting machines. If the most important thing in a tattoo is clarity of lines, use a contouring machine. It has a lighter weight and requires less pressure on the needle. Such a machine has a rigid short spring, so you can apply a clearer and smoother lines.

For painting large areas, paint guns are used. They have a heavier weight. This feature contributes to less physical strain when working. The movements of the needle in this case will have a larger sweep, and the amount of paint can be increased. Do not use contouring machines for large drawings - this can cause serious damage to the skin. The painting type machines are slower, but thanks to this they have a more gentle effect on the skin and create a denser pattern.

Operating Principle

The operation of devices of the rotary principle is provided by a motor with an eccentric, which uses the transformation of motion - rotational into reciprocating. The step-by-step scheme of the rotary machine operation is as follows:

  • The formation of attraction-repulsion forces between the poles of the rotor magnet (moving) and the stator magnet (stationary), causes the rotation of the electric motor;
  • an off-center pulley mounted on the rotor axis performs translational rotational motion, and converts it into reciprocating motion;
  • The reciprocating motion is transmitted to the rod at the end of which the needles are mounted.

The use of the rotor enables the output voltage of the power supply to adjust the force and speed of the needle impact. The range of needle penetration frequency for rotary type tattoo machines is from 5,400 to 11,400 revolutions per minute. Rotary tattoo machines have the best indicators for work - high power with minimal vibration force and noise level, much lighter than their induction counterparts. Thanks to the original system of fixing the needle, they are considered the safest in the work. Rotary tattooing machines are used as in the drawing of outlines, clear, smooth lines and fine details, as well as in the performance of multi-color, artistic tattoo.

What to choose a power supply for the tattoo machine

The key to the successful operation of the tattoo machine is a quality power supply, so it is necessary to take seriously the choice. At the moment there are two types of units: pulse and analog. The main difference between these types is that the pulsed ones can last much longer. Analogue units are less adapted to the constant transition from operating to shutdown mode and wear out faster. But this feature does not prevent these units from being more popular than the pulsed ones.

When choosing a power supply you should pay attention to the following characteristics:

  • Amperage. Analog units can have 1.5-3 amps, while pulse units have 2.
  • Over-voltage protection. With the help of this characteristic, you can protect the machine from possible breakage, as a consequence, protect yourself from unforeseen expenses.
  • Voltage.
  • Parameters of the input voltage.

Many tattoo artists attach importance to the compactness of the device and its portability, because there is a need to move the equipment. Some units have a built-in screen that displays basic settings. If there is a malfunction, you can see the last setting on the screen, and this is more convenient than setting it up again manually.

The more powerful the machine, the more powerful the power supply it requires. Differences in power can cause the appliance to break down. Also use quality cords. If the unit becomes less noisy, the cause may be damage to the wires and a lack of power to the power supply.

Some smart tips before you start assembling:

- not to complicate the design and avoid unnecessary modifications, it is better to take a motor with a plastic, not metal roller; - selecting a power supply, remember - a variable voltage will allow faster padding pattern; - wires should hang freely, so it is better to take flexible, in a silicone winding. The sequence of assembly and preparation of the components of the rotary tattoo machine is as follows:

  • Unscrew the gel pen, remove the paint, squeeze the ball out of the metal tip. Expand the hole in the tip a little, and use a fine file to grind a little. The body of the pen is cut in half. Cut the ink washed out rod so that its length is half the length of the body. Make a small hole in the plastic cone of the handle (for the accumulation of ink).
  • Prepare the string: noting its length, fix one end with pliers, and slightly stretching, take the tension. Holding the tension, to the place where the spout of the needle is planned, bring a lighter, and, heating, cut off the necessary piece. Having heated the string along its entire length - straighten it, and the end that will be attached to the motor - bend "d"-shaped. Sharpen the working end of the needle on a smooth sharpening stone, and bend it a little (so that it springs and beats to one point). Wash the ready needle thoroughly with soap.
  • Scotch tape or duct tape to the motor to attach a mount (you can use the bracket from a ballpoint pen or mechanical pencil, or make your own from tin). To be able to adjust the position of the string, do not fasten it firmly, leave a little play for the movement of the motor up and down on the body of the pen. Use a hot needle to make a hole in the string roll.
  • Use wires to connect the motor and the power supply.

Adjust the mechanisms: adjust the string so that the sharpened end was not more than half a millimeter away from the top of the handle, adjust the height of the motor relative to the centerline.

Rating of the best permanent makeup machines

We have compiled a list of machines for quality permanent makeup, which are most often recommended by professionals. Each of them has its own pros and cons.

Biomaser P300

The Biomaser P300 permanent makeup machines are compact, ergonomic devices that support four modes of operation. They are already pre-installed "out of the box", you can easily select the mode to work on the body, eyelids, eyebrows or lips.

Biomaser P300 manipulator for tattooing

Advantages:

  • Availability of a control unit, LCD display and digital panel;
  • Possibility to connect the foot panel;
  • full tightness of the construction due to the presence of silicone rings for connection of the safe module
  • multifunctionality - with Biomaser P300 you can perform mesotherapy procedure;
  • excellent geometry of the body.

The device supports operation speed from 50 to 250 beats per second. Its operating voltage is up to 12 volts or 2 amps. You can connect a total of two manipulators, each of which weighs from 57 to 67 grams (not including the cord and needle).

In addition to the pen-manipule itself in a velvet pouch, the kit already includes a box with needles, power adapter, connecting cable, control unit with touch keys of increased accuracy.

GIANT SUN G8650CP

The GIANT SUN G8650CP professional eyebrow, eye and lip tattoo machine is suitable for all techniques. The kit also includes disposable consumables and even motor grease. A handy case helps you store as well as transport your equipment.

Giant Sun G-8650 Tattoo machine

The machine works on both mains and battery power. Among the pluses of its use:

  • minimal maintenance cost;
  • noise level that does not interfere with work, not more than 15 decibels;
  • Ergonomic shape and light weight of the housing (its weight is about 50 grams);
  • constant rotation speed, easy adjustment of the motor speed;
  • high quality of assembly, increased safety.

Works with both acupuncture and standard needles. This version of the device is more suitable for professionals.

Mast (DragonHawk).

Mast is made of aviation aluminum, fits comfortably in the hand due to the short handle length (11.7 centimeters) and minimal weight (about 120 grams). Since the pen is of the modular type, it is considered completely sterile and safe.

Nature

For women

For men